Our “3D Trailing Glazes H” are raised effect glazes that fire matt and can be applied using the nozzle applicator or with a spatula. They can be directly applied to bisque or ontop of glaze.PRODUCT USE GUIDEUSAGEChrysanthos 3D Trailing Glazes H are a lead-free thick textured trail-able glaze designed for creating raised linear decoration.The 3D Trailing Glazes H can be used on bisque, in conjunction with underglaze decoration, or on top of unfired glaze. They can be left unglazed or may be coated with colored or clear glaze.Chrysanthos 3D Trailing Glazes H achieve stability and versatility, without cracking and come in a convenient nozzle squeeze bottle.To create more colors than those available, colors may be intermixed. This is achieved by squeezing colors to be mixed into a pallet and mixing with a clean brush or pallet knife. The mixed color may then be scooped back into a clean applicator bottle.APPLICATIONShake the applicator bottle well and always test on paper to ensure 3D Trailing Glaze flows correctly before attempting to decorate ware.If glaze appears too thick, add a few drops of clean water and shake to combine thoroughly.If applicator nozzle is blocked, remove and wash in hot water using paper clip wire to dislodge blockage. Dry nozzle before reattaching it to the bottle.To apply, gently squeeze the bottle with the applicator tip above (and not touching) the ceramic surface.PHYSICAL DATAThe Chrysanthos 3D Trailing Glazes H may be fired between cone 4 (1,186oC) and cone 8 (1,263oC) without significant flattening of the raised decoration.
To be applied on earthenware/low fire bisqueFiring range between Cone 4 (1,186°C) – Cone 8 (1,263°C)Colors are intermixableOnly brush on clear glazeWe highly recommended you trial your process on a test tile before you complete your masterpiece
