Hobby Clear Glaze can be used on earthenware bisque that has first been decorated with one of Underglazes, One Strokes or Cafe Colors. Once fired correctly, the Hobby Clear Glaze will protect the ware from moisture and discoloration caused by contact with food and liquids.The colored appearance of the brush on Hobby Clear Glaze is intended to assist application by highlighting glazed areas.SDS HOBBY CLEAR GLAZEPRODUCT USE GUIDEUSAGEChrysanthos Hobby Glaze is specifically formulated for application and firing on white clays used in the hobby ceramic industry. The colored appearance of the Hobby Clear Glaze is intended to assist application by highlighting glazed areas.When fired correctly, the Hobby Clear Glaze will seal and protect ceramic ware from moisture and discoloration caused by contact with food and liquid. The Hobby Clear Glaze also enhances Underglaze, One Stroke and Café Colors over which it has been applied.APPLICATIONAny Underglaze, One Stroke or Café Color decoration that has been applied on bisqueware should be dry before being glazed over using Hobby Clear Glaze.To obtain optimum results, 2 – 3 coats of glaze should be applied using a well-loaded glaze mop brush. Ensure each coat is dry before applying subsequent coats at right angles to one another (i.e. crosshatching).For glazing the interiors of hollow-ware a “roll glazing” technique is used. The glaze is diluted with 33% clean water to 67% glaze (1:3), poured into the vessel to be glazed and slowly rotated to ensure all interior surfaces are coated before draining.The remaining diluted glaze may be reserved for future roll glazing application provided it is stored in an air-tight container and properly stirred before re-use.The interior of vessels should always be glazed before the exterior to avoid over-handling and more importantly to avoid the possibility of damaging the external glaze.Hobby Glazes are also available in dipping versions. To dip, ensure that any decoration that has been applied to the bisqueware is dry. Stir the glaze thoroughly and adjust with water if necessary to achieve a milk like consistency. Proceed to dip pieces once using tongs, stirring glaze occasionally to keep the glaze uniform.Note: The application of lead-bearing glazes by spraying is not recommended.Due to its high porosity, hobby earthenware intended for the storage of food or beverages should be entirely glazed with Hobby Clear Glaze and stilted for glaze firing, rather than dry footed. This will eliminate the risk of moisture absorption and bacterial growth into the porous earthenware body.PHYSICAL DATAThe Hobby Glazes should be fired between cone 06 (999°C) cone 04 (1,060°C) to produce a clear glossy finish on bisque that has previously been fired between cone 04 (1,060°C) and cone 03 to (1,101°C).SAFTEY DATAChrysanthos Hobby Glaze when used with appropriate precautions are non-toxic however it does contain lead bi-silicate.Ceramic ware that has been coated with Hobby Clear Glaze, should not be used for the storage of food and beverages if it has crazed or not been fired correctly (Cone 06 to 04).
Suitable for application over Underglazes, One Strokes and Cafe Colors on earthenware bisque.Using 2-3 coats for optimum coverage. Wait for coat to dry between applicationsFiring range between Cone 06 (999°C) – Cone 04 (1,060°C)140 ml and 500 ml brush on sizesContains lead bisilicate
