Matt Glazes H are for application to middle fire bisque and when fired correctly will seal and protect the ceramic ware from moisture and discolouration caused by contact with food and liquids.SDS MATT GLAZES HPRODUCT USE GUIDEUSAGEChrysanthos Matt Glaze H Clear is a premium solid matt glaze designed to create a uniform matt finish on ceramic ware.Matt Glaze H Clear Glaze may be used over Underglaze and One Stroke decoration for a matted effect.Matt Glaze H Clear is for application to middle fire bisque and when fired correctly will seal and protect the ceramic ware from moisture and discolouration caused by contact with food and liquids.The colored appearance of the brush on Matt Glaze H Clear is intended to assist application by highlighting glazed areas.APPLICATIONTo obtain optimum results, 2 – 3 thick coats of Matt Glaze H Clear should be applied using a fan brush. Ensure each coat is dry before applying subsequent coats at right angles to one another (i.e. crosshatching). Water may be added if necessary to thin the glaze to prevent bubbling or other imperfections.The Matt Glaze H Clear brush on may be sprayed and thinned with clean water if necessary to improve glaze flow.When using the Matt Glaze H Clear Dipping Glaze, it may be necessary to add some clean water depending on the thickness of the glaze required on the ware and the firing temperature of the kiln. Stir the glaze thoroughly and to 10 litres of glaze add 400 – 500 ml clean water. Proceed to dip pieces once using tongs, stirring glaze occasionally to keep the glaze uniform.PHYSICAL DATAFor the best results, the Matt Glaze H Clear should be fired to between cone 4 (1,186oC) and cone 8 (1,263oC) on middle fire bisque. A slow firing is preferable to ensure that the glaze has time to smooth out and produce a smoot finish.SAFETY DATACeramic ware that has been coated with Matt Glaze H Clear may be used for the storage of food and beverages if the glaze has not crazed.Always refer to the bottle and SDS for all hazard and safety instructions.
To be applied only on middle fire bisqueUsing 2-3 solid coats. Wait for coat to dry between application.Matt Glaze H Clear Glaze may be used over Underglaze and One Stroke decoration for a matted effect.Firing range between Cone 4 (1,186°C) – Cone 8 (1,263°C)
